THIS PURCHASE IS FOR A BLACK ONYX COLOR BOOST BOTTLE KIT WITH EVERYTHING PICTURED.

This is a brand new DUAL 47/49/52cc Pocket bike boost bottle kit from Boost induction systems. Expand your intake to double the size! More area = more power and torque! Simple to install, replaces the original factory 47/49/52cc factory 4-bolt manifold. This addition will increase your torque by expanding your combustion chamber by means of storing fuel molecules in its induction chamber and forcing them back into your cylinder when you are on and off the throttle. Our metering system has been tweaked to accept the dual bottles to work with each other.. This bottle kit provides a "BOOST" or "supercharge effect".. It will add a substantial power increase in all power ranges (especially low end) Some customers have reported gains of up to 6-9 MPH, with a sick "punch" while appraoching the mid powerband. New to boost bottles and how they work?

****HOW BOOST BOTTLES WORK ****

As the engine draws fuel and air in through the carb on the intake cycle, the spark plug fires this mixture forcing the piston down and sucks a small amount of air into the carburetor for the next intake cycle. As the piston and crank bottom’s out on the bottom of the cylinder, the piston begins to make its return upward. As this cycle is happening, the piston pushes air back through the carburetor naturally under pressure. This action creates a reverb effect and causes the air / fuel mix to become double rich as by now it is processed TWICE by your carbs fuel jets. Most commonly, this results in rough idle, hesitation, bogging, and the ever-so- frustrating: Sputtering at top end. The reason the sputtering and bogging is happening is because of the double rich mixture. Heavy exhaust smoke, heavy engine loading is often looked at as too much oil / fuel ratio, bad carburetor, etc. While this may be one of those problems, it often is not. Your engine is actually choking itself out with a bad fuel mix! The installation of our Boost Induction Systems™ Boost bottles eliminates this nagging problem. (Hence the location of the inlet) Our Patent Pending Internal Metering System™ Automatically adjusts itself to work with your engines compression and carburetor. Our bottles will eliminate the reverb caused by your pistons return to top dead center (TDC) and remove the double mix! Now, with the bottle installed, operators are now no longer fooled by the double rich mix. This now allows proper adjustability of the carburetor! Tired of sacrificing top end speed for low end? Or low end speed for high? That’s because you have a double rich mix.You cannot have one or the other without a proper intake booster (Boost bottle).

WHAT ARE THE ADVANTAGES OF A "DUAL" BOTTLE KIT? WHY ARE 2 BOTTLES BETTER THAN ONE?

This is a great question. Having 2 inlets on the manifold doubles the passageway for both the rising pressure of the cylinder, and the other inlet for the downward. They will both work together to smooth out the incoming airflow and add a substantial amount of power rather than just one bottle alone. While a single bottle kit is VERY effective, the Double bottle kits are demanded by the more savvy engine builders, and competition racers whom have upgraded their engines and are going for the "Elite" in horsepower, torque and RPM gains rather than just a recreational hobby enthusiast.


WHAT IS IN THE BOOST BOTTLE AND DO I NEED TO REFILL IT?

No, you do not need to refill the boost bottle as their sole purpose is to even out your fuel mix and apply the right amount of pressure to let you carburetor breathe better. Once your boost bottle is mounted on your engine, please do not remove it. It will outlast the life of your engine and can be transfered from one engine to another for years to come. It does not need to be refilled

This kit will fit:

Giovanni pocket bikes.
ZEMEINI pocket bikes.
LUCKY 7
DAYTONA POCKET BIKES.
MT-A1
CAG
DAYTONA
Giovanni dirt bikes too!

ALL OF THE REALLY SMALL MINI BIKES WITH A CASE REED ENGINE AND PULL STARTER ASSMELBLY!


*This is a aftermarket racing product which is designed to exceed the factory horsepower / speed rating set by the manufacturer. The abuse of this product could result in serious injury while exceeding these speed / power ratings. Please remember this is a closed course racing product and to always wear a helmet and use good judgement.


*COPYRIGHT 2011 BOOST INDUCTION SYSTEMS U.S.A. ALL RIGHTS RESERVED*
$39.99